SP80B Spirometer
Introduction
The SPIROMETER is a portable equipment for checking lung conditions, adopting infrared signal acquisition mode to measure PSC-related items, and it is applicable to hospital, clinic, home for routine testing.
Function
Forced vital capacity (FVC), forced expiratory volume in one second (FEV1) versus forced vital capacity (FVC) (FEV1/FVC), peak expiratory flow rate (PEF), forced expiratory flow rate at 25% of FVC (FEV25), forced expiratory flow rate at 50% of FVC (FEV50), forced expiratory flow rate at 75% of FVC (FEV75), and forced expiratory flow rate from 25% to 75% of FVC (FEV2575) can be measured;
Staff information (including height, age, gender, etc.) can be set
.Display of flow-volume graph, volume-time graph
.Data may be stored, deleted, downloaded and reviewed
.Displaying the trend graph
.Indication of health status
.Calibration function
.Alert function in case of exceeding volume and flow rate
.Indicates expiration within 6 seconds by indicators
.One-button measurement start
.Data can be transmitted via Bluetooth or USB cable
.Real time clock can be set and displayed
.Battery power indication
.Automatic shutdown if no operation for two minutes
Spirometer SP100A
Introduction
The spirometer is a portable device for testing pulmonary function, it adopts the principle of differential pressure acquisition to measure more than 100 parameters related to the functions of FVC, VC, MVV and MV. It can be used in many scenarios, such as hospital, clinic, family, MVV test and provocation before/after medication, etc. It can provide the results of pulmonary function test for users and serve as a basis for medical staff to make a diagnosis.
Features
Differential pressure sensing technology, with professional pulmonary function software, which can measure more than 100 parameters related to the functions of FVC, VC, MVV and MV.
Measurement of inspiratory and expiratory parameters, real-time display of the curve.
BTPS correction function, automatic measurement of temperature, humidity and barometric pressure.
Quality control function, automatic quality control scoring.
Calibration check function: volume calibration, three stream check.
Displaying the optimal value among many measurements.
The condition of the tester can be reflected by the ratio of the measured value to the predicted value.
Flow-volume and volume-time curve.
Data memory, deletion and information review functions.
Trend display.
Alert functions in case of volume and flow exceedance.
Rechargeable lithium battery, with charging alert.
Battery power indication.
Multiple predicted values integrated.
Support for bronchial dilation/provocation tests.
Assessment of pulmonary function.
Follow-up questionnaire function.
Entry, management and consultation of patient information.
Possible connection to an external printer to print and export the test report.
10.1 inch capacitive touchscreen.
Wi-Fi function.
Voice prompt function.
Integrated ID card reader (optional).
SPM-D Spirometer
Introduction
SPM-D is a pulmonary function tester, combined with professional pulmonary function software, it is used to test the patient's respiratory function and lung condition; it adopts the principle of differential pressure collection to measure PFC, slow VC, FEV1, MV and related parameters, real-time display of respiratory waveform, which is applicable for diagnosis and response evaluation of pulmonary diseases (such as asthma, COPD, pulmonary fibrosis and cough, etc.), preoperative safety evaluation and routine physical examination, etc. It can be widely used in many scenarios, such as respiratory medicine, thoracic surgery, anesthesiology, surgery, occupational disease prevention and control institutions, physical examination institutions, etc.
Features
Measure and display over 100 parameters related to CFP, slow CV, FEV1 and MV functions.
Display trend graph and tested respiratory waveform, intelligently recommend optimal test curve.
With user information and case data management functions.
Multiple built-in predictive values, which can be manually adjusted.
BTPS self-correction function, automatically measure environmental parameters.
Pulmonary function assessment function.
Supports bronchial testing.
With calibration and quality control function, ensure the test accuracy.
With quality control function, intelligently recommend test curve with high acceptability.
With report generation, editing and printing functions.
One-button test function.
R100BP Positive Airway Pressure Devices
Introduction
The device is used to relieve snoring, hypopnea, and sleep apnea in patients (weight: over 30 kg) during sleep, to provide adjunctive therapy. It can be used at home, in clinics, and in hospitals.
.It features exquisite and compact structure design and is easy to carry. It has friendly human-computer interaction, simple function operation, and is easy to use.
.Its main functions include: three therapy modes (CPAP, BILEVEL, IBPAP), real-time display of therapy information, data storage, respiratory gas warming and humidification, USB data transmission, real-time clock
.Product Features
Smart Start: After identifying the mask position, it can automatically start/stop therapy
.Event Detection: Automatically detects respiratory events, such as leaks, hypoventilation, apnea and snoring index
.Automatic switch: automatically triggers and switches inspiratory and expiratory pressure depending on respiratory status
R100ST Positive Airway Pressure Device
Introduction
It is suitable for the treatment of patients with sleep apnea hypopnea syndrome and can also be used for the treatment of sleep apnea combined with chronic obstructive pulmonary disease (COPD) and obesity-related hypoventilation syndrome (OHS). It is suitable for use at home, in clinics and in hospitals.
.It features exquisite and compact structure design and is easy to carry. It has friendly human-computer interaction, simple function operation and is easy to use.
Its main functions include
:Six therapy modes (CPAP, S, T, ST, PAC and SVAPS), real-time display of therapy information, data storage, breathing gas warming and humidification, USB data transmission, real-time clock
.Product Functions
Smart start: After identifying the mask wearing, it can automatically start/stop the therapy
Event Detection: Automatically detects respiratory events such as leaks, hypoventilation, apnea and snoring index.
Automatic switching: Automatically triggers and switches inspiratory and expiratory pressures based on respiratory status.
Adjustable Parameters: Users can set the parameters, such as ramp time, humidity level (6 levels), rise time and trigger sensitivity.
Leakage compensation: Supports automatic leakage compensation within a range.
Data storage: Support multi-dimensional data storage and verification function, such as respiratory events, treatment data.
Large screen: displays real-time parameters and detailed therapy data.
Six therapy modes: CPAP, S, T, ST, PAC, SVAPS
SVAPS (Smart Volume Assured Pressure Support): By adjusting the pressure support, adjusts the minute volume towards the preset target to ensure volume support.
Backup Rate Function: In case of continuous apnea, simulates the user's breathing rate to provide respiratory support, and automatically stops after normal breathing.
RPM10 Respiratory Pressure Measuring Device
Introduction
The respiratory pressure meter is a portable respiratory muscle strength testing device, capable of measuring parameters such as maximum inspiratory pressure (MIP) and maximum expiratory pressure (MEP) non-invasively, and displaying the pressure-time curve in real time. It is applicable to the evaluation of the effect of neuromuscular diseases on inspiratory muscle function and pulmonary diseases, as well as the evaluation of the effect of respiratory muscle function, sputum capacity, and respiratory rehabilitation exercises in patients with chronic obstructive pulmonary disease, thoracic malformation, and drug poisoning. It is also used as an indicator to judge whether artificial controlled mechanical ventilation can be discontinued. The respiratory pressure meter is often used by various medical institutions, providing respiratory muscle strength examination results to users and providing medical personnel with a diagnostic basis.
Features
a. MEP function test:
Real-time display of the pressure curve;
Calculation and display of parameter values and their ratios to expected values, display of quality control rating and display of the best value among several measured values;
b. MIP function test:
Real-time display of the respiratory curve;
Calculation and display of parameter values and their ratios to expected values, display of quality control rating and display of the best value among several measured values;
c. Displaying the trend graph;
d. LED indication: After successful connection, the LED lights up; during data collection, the LED flashes;
e. Beep: After successful connection, the beep sounds, indicating that the connection is successful; after pressing the key, the beep sounds.
